Hit enter to search or ESC to close
Material | Commercial Grade Aluminium |
Application Type | Gutter Guard |
Coating/Color | Powder Coated Charcoal color |
Manufacturing Technique | Expanded |
Sheet Thickness Before Coating | 0.6mm |
Strand Width Before Coating | 0.8mm |
SWM | 4mm |
LWM | 6mm |
Mesh Weight (approx) | 500 g/m2 |
Max Roll Size | 1000mm x 50m |
Standard Widths | 250/500/1000mm |
Aluminum gutter guard mesh are mainly installed above eaves gutters or roof gutters to effectively prevent leaves, branches, pine needles, and other debris from entering the drainage system, while also preventing small animals from entering the gutter. They significantly reduce the risk of gutter blockage without affecting drainage.
Effectively:
Ensuring the normal operation of the roof drainage system
Reducing the frequency and maintenance costs of manual gutter cleaning
Preventing rainwater damage to the roof, walls, and foundation
Extending the service life of the gutter and the overall drainage system
Aluminum gutter guard mesh are widely used in residential buildings, commercial buildings, and industrial plants, and are especially suitable for areas with dense trees or high leaf litter.
1. The aluminum gutter guard mesh features a rationally designed mesh size, effectively blocking leaves, branches, pine needles, and roof debris, preventing gutter blockage.
2. The scientifically designed mesh structure maintains good water permeability while intercepting debris, ensuring smooth drainage even in heavy rain.
3. Aluminum gutter guard mesh is typically made of high-quality aluminum alloy, which is corrosion-resistant, suitable for long-term outdoor use, and resistant to rust and aging.
4. Through a stretch forming process, the structure is stable and can withstand accumulated leaves and wind and rain impacts, possessing a certain load-bearing capacity.
5. Aluminum gutter guard mesh can be cut to fit different gutter sizes, is easy to install, and has strong adaptability.
Installing a aluminum gutter guard mesh in a gutter is a relatively simple DIY project.
1. Measure the total length of the gutter and the actual width of the gutter opening.
2. Using scissors or metal shears, cut the aluminum gutter guard mesh to the appropriate size, ensuring it fits snugly against the gutter edges.
3. Lay the cut mesh flat into the gutter and secure it with plastic clips, screws, or weather-resistant cable ties.
4. After installation, check that the eaves mesh is securely fixed and that it does not obstruct normal rainwater drainage.
Common Widths and Sizes
Aluminum gutter guard mesh are available in various sizes to fit different gutter systems.
Common roof guard widths: 4 inch, 6 inch, 8 inch, 10 inch, and so on
Single mesh length: 1m/1.2m/1.5m/2m
Roll length: 10m-50m/roll
Mesh size and thickness: 0.6mm/0.8mm/1.0mm
Aperture type: Diamond stretched mesh (most common), also available in aluminum woven mesh and stainless steel woven mesh.
